What is Easy JTAG Plus?
Easy JTAG Plus is a tool used to fix and repair mobile phones, tablets, and other devices. It helps recover lost data, repair software issues, and flash firmware.
- Easy Jtag Plus Box Setup v3.8.0.4
- EasyJtag Classic Suit v3.8 (Beta)
- Easy Jtag Plus Box Setup v3.7.0.24
- Easy Jtag Plus Box Setup v3.7.0.23
- Easy Jtag Plus_Emmc_Plus_Setup_v1.6.6.0
What You Need Before Starting
Make sure you have:
Easy JTAG Plus Box (the main tool)
Cables and Adapters (to connect phones and chips)
A Windows Computer (Windows 7, 8, 10, or 11)
Drivers and Software (download from the official website)
Installing Easy JTAG Plus on Your Computer
Step 1: Download Drivers & Software
- Go to the official Easy JTAG website.
- Download the latest drivers and software.
Step 2: Install Drivers
- Extract (unzip) the files.
- Double-click Setup.exe and install the drivers.
- Restart your computer when done.
Step 3: Install Easy JTAG Plus Software
- Open the downloaded Easy JTAG Plus Suite file.
- Click Next and follow the setup instructions.
- Restart your computer after installing.
Connecting Easy JTAG Plus to Your Computer
Plug in the Easy JTAG Plus Box to your computer with a USB cable.
Open Device Manager (press Windows + X, then click “Device Manager”).
If you see “Z3X Easy JTAG” under USB devices, it means the setup is correct!
First Time Setup & Configuration
Update Firmware (Software for the Box)
- Open the Easy JTAG Plus Suite software.
- Go to Firmware Update.
- Click Check for Updates and install any updates found.
Test the Connection
- If the software detects the box, everything is good to go!
- If not detected, check the USB cable or reinstall the drivers.
How to Use Easy JTAG Plus for Repairs
Common Repair Modes:
ISP Mode → Repairs a phone without removing its chip.
EMMC Mode → Reads and writes data on a phone’s memory chip.
JTAG Mode → Fixes phones that won’t turn on.
Troubleshooting (Fixing Common Problems)
Problem: Box not detected
Try another USB port or different USB cable.
Reinstall drivers from the official website.
Problem: Phone not detected
Check pin connections (use the correct adapter or ISP wires).
Try manual power supply (1.8V or 3.3V) for some chips.
Problem: Software crashes or doesn’t work
Install Microsoft .NET Framework & Visual C++ (from Microsoft’s website).
Run the software as Administrator (Right-click → “Run as administrator”).
Final Tips for Using Easy JTAG Plus
Always use original cables and adapters.
Keep your drivers and software updated.
Be careful when connecting ISP wires (wrong connections can damage the phone).
Backup important data before flashing or repairing a phone.
